Tall Timber

Crossfader

Simple 2-channel mixer with 1 control

Crossfader Features

  • 2 High-impedance JFET-buffered inputs,

  • 1 Low-impedance buffered output,

  • 45mm fader to blend the two inputs,

  • 9VDC @ 10mA power input (BOSS-standard jack),

  • Carved walnut wood top,

  • Powder-coated aluminum enclosure,

  • White LED power-on indicator.

FaderDLX_MKII_11.JPG
Dimensions
Block Diagram

360 View

Technical Specifications

  • Inputs

    Jack: 1/4” Unbalanced Tip/Sleeve

    Input Impedance: > 2 MOhm

  • Output

    Jack: 1/4” Unbalanced Tip/Sleeve

    Output Impedance: < 600 Ohms

  • Controls

    45mm Fader Blends 2 Inputs into Output. See Charts for More Details.

  • Power

    Jack: 2.1mm/5.5mm Barrel Jack, Center-Negative (BOSS Standard Power Jack).

    Voltage: 8 - 12 VDC. 9VDC Recommended

    Current: < 10mA

  • Bandwidth

    20 Hz - 20kHz +/-1dB Flatness with -20dBu Input at Full Volume. See Charts for Details.

  • Distortion

    THD[2-5] < 0.007% with -20dBu Input Level.

  • Dimensions

    (LxWxH): 112 x 65 x 47 mm

  • What's in the Box

    Crossfader Unit,

    Optional Rubber Feet,

    Protective Muslin Bag.

  • Materials

    Enclosure: Machined Cast Aluminum with Urethane Coating,

    Top: Carved Solid Walnut Wood,

    Electronics: Surface-Mount and Through-Hole Components on Printed Circuit Board.

Gain vs Fader Position

Gain vs Fader Position

Frequency Response at Various Fader Positions

Frequency Response at Various Fader Positions